Miniature vacuum switch for the tightest installation spaces with potentiometer
Miniature design for the tightest installation spaces
360° rotatable
LED operation and status display
Extremely lightweight: 8g
Connection options
The fluid connection is available with M5 thread or pipe connection. For the electrical connection either a M8 connector or a permanently connected cable with a free power end are a the available options.
Adjustment of switching points via potentiometer
With the VS11, the switching points can be adjusted on site using an potentiometer.
Mounting position:
Any (port downwards when using oiled air)
Operating temperature:
Operation -10°…+60°C, Storage -20°…+85°C
max. overpressure:
With -1...0 and -1...1 bar: 2 bar
Output voltage:
approx. Ub -1,5 V
Switching point:
Adjustment potentiometer 100%
Hysteresis mode:
approx. 5% FS
Type:
Miniature designs
Measuring range:
-1...0 bar, -1...1 bar
Output:
1x switching signal (PNP)
Output current:
max. 100 mA
Output function:
NO, NC
Response time:
< 2,5ms
Repeatability:
± 3% FS
Process connection:
Tube connection 4 mm, M5 thread
Material (process connection):
Brass nickel-plated
Electrical connection:
M8 3-pole, open ended wires
Operating voltage:
9...30 VDC
Current consumption:
< 20 mA
Short-circuit / reverse polarity protection:
yes / yes
Material (housing):
Plastic
Protection class:
IP40
Operating medium:
Filtered, dry or oiled air and non-corrosive gases
