VS11
€79.00*
zzgl. MwSt. Prices excl. VAT plus shipping costs
Available, delivery time: 6 -7 Days
Miniature vacuum switch for the tightest installation spaces with potentiometer
- Miniature design for the tightest installation spaces
- 360° rotatable
- LED operation and status display
- Extremely lightweight: 8g
Connection options
The fluid connection is available with M5 thread or pipe connection.
For the electrical connection either a M8 connector or a permanently connected cable with a free power end are a the available options.
Adjustment of switching points via potentiometer
With the VS11, the switching points can be adjusted on site using an potentiometer.
| Current consumption: | < 20 mA |
|---|---|
| Electrical connection: | M8 3-pole, open ended wires |
| Hysteresis mode: | approx. 5% FS |
| Material (housing): | Plastic |
| Material (process connection): | Brass nickel-plated |
| Measuring range: | -1...0 bar, -1...1 bar |
| Mounting position: | Any (port downwards when using oiled air) |
| Operating medium: | Filtered, dry or oiled air and non-corrosive gases |
| Operating temperature: | Operation -10°…+60°C, Storage -20°…+85°C |
| Operating voltage: | 9...30 VDC |
| Output: | 1x switching signal (PNP) |
| Output current: | max. 100 mA |
| Output function: | NC, NO |
| Output voltage: | approx. Ub -1,5 V |
| Process connection: | M5 thread, Tube connection 4 mm |
| Protection class: | IP40 |
| Repeatability: | ± 3% FS |
| Response time: | < 2,5ms |
| Short-circuit / reverse polarity protection: | yes / yes |
| Switching point: | Adjustment potentiometer 100% |
| Type: | Miniature designs |
| Weight: | 8 g |
| max. overpressure: | With -1...0 and -1...1 bar: 2 bar |
